At last..

Some animation. Had to test the scanner, so I used M23_Shot286. Scanner works, Mutwale lives. 523 shots to go.

Need to double-check the timing- I don't have the drawings themselves, so I don't have the original charts. The pencil test seems correct, the alpha composite seems a tad slow.

More as it happens.

The Gauntlet, The Standfast, and the Intuos

I built this abomination in order to do some paint-on-glass work for Plus et Plus. This was my second time doing something for them with this medium, unfortunately it turns out they didn't need much of it.

The Gauntlet:

Canon EOS SLR (in this case a 20D) controlled via DSC plugin for Framethief 2.19 mounted to c-stand via superclamp. Panasonic HVX (or summat) on a tripod for lo-res playback. A few units from a light kit. A desk lamp. 2 pieces of plexi, 1 opaque white, 1 opaque black, cut to size at T and T plastics, 315 Church St. just up from Canal. Then lots of acrylic pumped full of retardant and stored in squirt bottles. For those of you paying attention, yes, due to the use of opaque plexi this is a top- (or front-)lit rig.

I've never really had this much trouble from a setup. Some of it was my fault, some of it was the fault of the studio in charge of the equipment, and some of it was just plain bad luck. My Mac died on day 3 and had to be replaced- The DSC plugin for FT is crummy and doesn't support newer cameras, so when we wanted to switch to an EOS 5D that held a Zeiss 80mm Macro lens, it wouldn't work. So we put the lens on the 20D- which wouldn't work. Evidently the lens and the body wouldn't be friends and upon any attempt to take a picture, a big "Err 001" sign would flash in the EOS LED, then the whole camera would lock up.... On and on like this for days, every day.

These are just a few tests I did one day, then the client cut all my paint-on-glass stuff. I was all pumped to do some moving Turner-like fog, but evidently they misunderstood what "paint-on-glass" animation is. So, again, I never got to take the stuff past simple one-off tests. It seems that just when I'm ready to get rolling with this stuff, I get cut off. Grr.

The 1080p versions are a bit more eye-candy lookin', but they're still just tests. I will say this: I'm strongly considering picking up Dragon Stop Motion for my stand alone P.o.G. rig. Framethief works for pencil testing, and I own a commercial license for it. Still, DragonSM works the same way but with a better interface and more support for various models of SLR cameras, and in some cases allows for viewfinder preview without an additional firewire video source. This cuts out a whole fileset and piece of gear so I'm considering taking the plunge. Not to mention they aren't charging an exorbitant amount for their software, something I truly appreciate these days.

The Standfast:

Now that I have my own camera stand, I could theoretically get some non-drying sculpty and do some stop motion films with no added setup. Oh, I forgot to mention. My lovely, fantastic, amazing cousins donated an old camera stand to my efforts. It's a CS-5 TestRite. No more jury-rigged tripods.

And, for my christmas present to myself, a brand-spanking new Wacom Intuos 4. Cost: Relative. Size: Medium. Impact: Huge. After years of gifted graphires and hand-me-down tablets, I had to take the plunge and get a pro model.

Next post will be about this feature film that I'm cutting on contract. It's nearing completion, I'm just waiting on some pickups. After this job, I'm not taking any more contract work until my film is complete.

Music (aforementioned)

It's been requested that I post that music track I've recorded- I don't really know html so I'm uncertain the best way to embed an MP3 here in my blog.

In the meantime, enjoy this dancing hamster. Wait. Aha! I found something. Thanks Odeo embeddable player. There's no need for a Hamtaro gif. You're safe. FOR NOW.



Play it loud. Comments of course welcome- I'm not entirely set on the chord progression but I'm pretty happy with the voice/oscillators. (I think 2 voices @ 2 oscillators = 4 oscillators.) There's a pop or two when the higher-velocity base notes hit, I'm going to clean those up later.

In other news, my brand new Sakura Electric SE-2000 Portable Cordless Handheld Eraser arrived in the mail today! w00t. The first in a line of materials shipments. Things are happening. I am giddy.

I lied. You've been exposed to a Ham-Ham.

Storyboards Continued, Some Light Music

Research has its merits but in this instance it was a real pain. I started thumbs back in October of 2008 so there's a sequence or two that I discovered simply wouldn't work. Logistically, there would've been no elder elephant population in Akagera when my group of younglings arrived, so I had to rework some things. It's for the best because Mutwale gets more development this way- but deviating from the thumbs put me in a tight spot- momentarily. It's hard to mess with a timeline about an elephant Family's development so I ended up cutting a big chunk and replacing it. Slight detour.


In other news my synth-tastic synthesizer, an Ensoniq FiZmO and I had a session concerning this very film. I've had some ideas for music but I'd really not laid anything down. Until today! Simple chord progression with pretty advanced waveforms and some intensive EQ'ing yielded a little gem. I don't think it's fit for final but it's a good start and at the very least a solid reference.

Of Macs and Men Pt. II

So there I was. Staring straight at my monitor in disbelief, unmoving. Like a parent approaching a new but not entirely unexpected situation with a problem child: Not angry, just disappointed.

My G5 suffered catastrophic system failure last week for the 5th time. For the third time in 5 years, OSX suffered a fatal crash that permanently dismounted the system drive. While 5 years seems like a good run, let me explain something: This HD was brand new, installed in January of this year. I'm beginning to think that it was simply a dud from Seagate, but then it was also a root user restore, which means any existing permissions problems would have carried over. Of course I back up often but that's not the point. And certainly I prefer it to the previous issues with this machine: constant Kernel Panics due to a faulty Logic Board (which has been replaced twice and still doesn't want to recognize DV firewire signals from the tower ports. Yes, the firewire bus is tested and working.)

It's pretty well known that Macs have the hardware issues, PC's have the software issues, and Linux users laugh at everyone. But this Mac- my Mac- is from a batch of bad Apples (heh) from 2004. Second gen, first issue liquid cooled G5's that were rushed out the door to fill orders for the first gen machines. (I ordered a first gen machine, not in time to avoid being screwed.) These are the G5's from hell. Before they went out the door, they gave Steve Jobs cancer. They were christened with the blood of sacrificed goats, washed clean with the bile of Hedonism demons, and delivered to the doorstep of unsuspecting professionals everywhere.

In any case, yes, 5 years is a good run and most PC users would say it's about time for a new machine because, DUDE, yer hardware is like SO out of date. But the simple fact is that it's not. I built a monster 5 years ago and it's still up to the task of some of the most advanced compositing and animation tasks you can throw at it. It's just never been stable hardware, and that's entirely Apple's fault.

Sure, it's a PPC chipset that can't run most of the latest and greatest upgrades, but 1)it runs the last generation- CS2, CS3, Final Cut Studio 2- just fine and 2)the latest and greatest will likely have its own issues for a year or two, not to mention a modicum of superficial upgrades that I don't need. I'm fine running what I do, it gets the job done. When it works.

Will my next computer be a mac? Yes. Am I going to rush into a new chipset and order an early generation build before all the kinks are worked out? Absolutely not. Never. Again.

So this time, I'm running an internal scratch drive and installing only the software I need to use immediately. Regular permissions repairs with advanced third party disk utility software should keep this puppy rolling for another year or two, which is all I need.

But yeah. No posts recently because there's not been any work recently. Tech's a bitch.